1070 Aluminum Coil
Introduction
1070 aluminum coil belongs to series 1 pure aluminum, containing 99.7% aluminum. It has good electrical and thermal conductivity, high plasticity and corrosion resistance. 1070 aluminum coil cannot be strengthened by heat treatment, its strength is not high, and its machinability is not good, but it can be welded if necessary.
The Introduction of 1070 Aluminum Coil
1070 aluminum coil belongs to series 1 pure aluminum, containing 99.7% aluminum. It has good electrical and thermal conductivity, high plasticity and corrosion resistance. 1070 aluminum coil cannot be strengthened by heat treatment, its strength is not high, and its machinability is not good, but it can be welded if necessary. It is often used to manufacture structural parts with specific properties, such as protective nets, wire cores and coils for wires and cables, and aircraft ventilation system parts.
The Product Specification of 1070 Aluminum Coil
| Alloy | 1070 |
| Temper | O,H12,H14,H16,H18,H22,H24,H32,H34,H36,H38,etc. |
| Thickness(mm) | 0.15-6 |
| Width(mm) | 100-2650 |
| Length(mm) | C |
| ID | Ø505mm or customized |
| Package | Eye to sky or Eye to wall |
| Application | Radiator, charging pile, anti-corrosion insulation, transformers, aircraft ventilation system parts, etc. |
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Others | AL | |
| 1070 | 0.2 | 0.25 | 0.03 | 0.03 | 0.03 | - | 0.07 | 0.03 | - | Single | Total | 99.7 |
| 0.03 | - | |||||||||||
Mechanical properties
| Alloy & Temper | Tensile strengthRm/Mpa | Yield strengthRp0.2/Mpa |
| 1070-O | 55-95 | 0-15 |
The Product Features of 1070 Aluminum Coil
● 1070 Aluminum coil has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity.
● 1070 Aluminum coil can be welded by gas welding, hydrogen atom welding and contact welding.
● 1070 Aluminum coil is easy to withstand various pressure processing and extension and bending.
The Application of 1070 Aluminum Coil
1070 Aluminum coil is mainly used for alloy castings of structural parts such as aircraft wall panels, front beams, joints, pillars and landing gear, beauty equipment, and notebook casings.
