5052 Marine Aluminum Sheet Plate

The 1050 aluminum sheet plate comprises over 99.50% aluminum, classifying it as one of the grades of commercial pure aluminum. It exhibits high plasticity, resistance to corrosion, superior electrical and thermal conductivity, albeit with moderate strength. Notable for its excellent formability, high corrosion resistance, good weldability, and electrical conductivity.

1060 alloy is a high-purity alloy with a content of at least 99.6%. Has excellent weldability, formability, and corrosion resistance. Various forming processes such as impact, cold drawn, deep drawing, and bending can be easily carried out.

The 1070 aluminum sheet plate boasts the highest aluminum content within the 1 series of pure aluminum alloys, reaching an impressive 99.7% purity. It inherits the exceptional thermal and electrical conductivity, corrosion resistance, and superior plasticity characteristics of the 1 series.

1050 Aluminum coil contains more than 99.50% aluminum, which is one of the pure aluminum series. 1050 aluminum coil has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength.

1060 Aluminum coil contains more than 99.60% aluminum, which is industrial pure aluminum and belongs to a commonly used series in the aluminum strip series. 1060 Aluminum coil has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity.

1070 aluminum coil belongs to series 1 pure aluminum, containing 99.7% aluminum. It has good electrical and thermal conductivity, high plasticity and corrosion resistance. 1070 aluminum coil cannot be strengthened by heat treatment, its strength is not high, and its machinability is not good, but it can be welded if necessary.

1050 Aluminum foil is pure aluminum foil, content of aluminum is more than 99.5%, which has the characteristics of low density, good electrical conductivity, thermal conductivity and corrosion resistance, is commonly used in the electrical and chemical industries.

1060 aluminum foil is an alloy foil with 99.6% Al content in 1 series pure aluminum products, so it retains the excellent ductility, corrosion resistance, electrical conductivity, and thermal conductivity of pure aluminum.

1070 aluminum foil contains 99.7% Al and is the highest purity alloy foil in 1 series aluminum foil. Therefore, 1070 aluminum alloy foil retains extremely high conductivity and thermal conductivity close to pure aluminum.In addition, it has excellent formability, weldability, corrosion resistance, and anodization.

1100 aluminum tread checkered plate sheet belongs to industrial pure aluminum, and the aluminum content reaches more than 99.00%. Both the 1100 and the 1060 aluminum tread checkered plate sheet cannot be thermally treated, but they have extremely high corrosion resistance, the electrical conductivity and thermal conductivity are relatively good.

1100 aluminum plate is a common industrial pure aluminum alloy plate with an aluminum content of 99%. It is not high in strength and cannot be strengthened by heat treatment.

3003 Aluminum sheet plate belongs to AL-Mn series alloy, which is a kind of anti-rust aluminum widely used. The strength of 3003 aluminum plate is not high (slightly higher than industrial pure aluminum), and it cannot be strengthened by heat treatment.

3004 Aluminum sheet plate is an AL-Mn alloy, which is also a widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum), and it cannot be strengthened by heat treatment.

3005 Aluminum sheet plate is an aluminum alloy with Mn as the main alloying element, is a kind of aluminum alloy that cannot be strengthened by heat treatment. Therefore, cold working method is used to improve its mechanical properties.

3104 Aluminum sheet plate is aluminum-magnesium-manganese alloy, is a 3-series anti-rust aluminum plate alloy. Its tensile strength is ≥275MPa, and its elongation is as high as 20%. The main alloy components of 3104 aluminum plate are magnesium and manganese, the magnesium content is between 0.8-1.2 and the manganese content is between 0.8-1.4.

3105 aluminum plate is series of AL-Mn alloys, the commonly used tempers are O, H12, H14, H18, H22, etc. 3105 aluminum magnesium manganese plate is a very good rust-proof aluminum alloy, has good electrical conductivity and mechanical properties, good deep drawing performance and tensile strength, excellent corrosion resistance, excellent plasticity and process performance, and has excellent performance in gas cutting and arc welding.

5005 aluminum sheet is an aluminum-magnesium alloy with medium strength, good corrosion resistance, good weldability, good processability, low density, light weight, good heat dissipation, and strong compression resistance. It is widely used in cooking utensils, instrument panels, shells and architectural decorations, interior and exterior materials for building materials, and interior materials for vehicles.

5052 Aluminum sheet plate is an AL-Mg series alloy with a magnesium alloy content of about 2.5%, is the most widely used anti-rust aluminum. 5052 Aluminum plate has the advantages of 3 series anti-rust aluminum plate and the excellent formability of 5 series alloy; It has good corrosion resistance, good weldability, good cold workability, medium strength, good material formability, suitable for various stamping, bending and other sheet metal processing, and good anodic oxidation. It can be oxidized and colored into various bright and bright colors, and is used in mold manufacturing, production of machined parts, etc.

1100 Aluminum coil belongs to the 1 serie alloy, and The aluminum content is more than 99%. 1100 aluminum coil and 1060 aluminum coil are industrial pure aluminum. The strength of 1100 aluminum coil is relatively low, has excellent ductility, formability, weldability and corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity; After anodizing, corrosion resistance can be further improved and more beautiful surface can be achieved; however, it cannot be strengthened by heat treatment.

1100 Aluminum coil belongs to the 1 serie alloy, and The aluminum content is more than 99%. 1100 aluminum coil and 1060 aluminum coil are industrial pure aluminum. The strength of 1100 aluminum coil is relatively low, has excellent ductility, formability, weldability and corrosion resistance, electrical conductivity and thermal conductivity, low density and good plasticity; After anodizing, corrosion resistance can be further improved and more beautiful surface can be achieved; however, it cannot be strengthened by heat treatment.

5086 aluminum plate belongs to the AL-Mg series alloy, magnesium content between 3.5% and 4.5%, is a kind of anti-rust aluminum and non-heat-treatable alloy with high corrosion resistance, good weldability and medium strength. 5086 Aluminum plate is higher strength than 5052, and better corrosion resistance than 5083, and its mechanical properties change significantly with hardening and temperature.

5754 Aluminum sheet plate is AL-MG anti-rust aluminum, belongs to Almg3 series, magnesium alloy content is between 2.6-3.6%, has medium strength, good anti-rust and corrosion resistance, no color difference on anodized surface, excellent processing performance, good corrosion resistance, high fatigue strength, high weldability and moderate static strength. 5754 aluminum sheets in different heat treatment tempers are the main materials required in the automobile manufacturing industry (car doors, molds, seals) and tank trucks industry. We can provide different specifications of 5754 medium-thick aluminum plate, 5754 automotive aluminum plate, 5754 tank truck aluminum plate, 5754 patterned aluminum plate, 5754 ultra-wide aluminum plate.

6061 aluminum plate belongs to Al-Mg-Si alloy, the main alloy elements are magnesium and silicon, with medium strength, good corrosion resistance, weldability, and good oxidation effect. In particular, it has no tendency to stress corrosion cracking, has excellent weldability, good corrosion resistance and cold workability, and is a promising alloy with a wide range of applications. 6061 aluminum plate can be anodized and colored, and can also be painted with enamel, which is suitable for building decoration materials. It contains a small amount of Cu, so its strength is higher than that of 6063, but its quenching sensitivity is also higher than that of 6063. Air quenching cannot be achieved after extrusion, and it needs re-solution treatment and quenching aging to obtain higher strength.

The 6082 aluminum plate, like the 6061 aluminum plate, contains Mg, Si, Cu and other metal elements, has good formability, weldability, machinability and corrosion resistance, has medium strength, and can still maintain good operability after annealing. 6082 Aluminum plate has similar but not identical mechanical properties to the 6061 alloy, and its temper T6 has higher mechanical properties; the tempers 0 and T4 of 6082 alloy are suitable for bending and forming, and its tempers T5 and T6 are suitable for good machinability requirements. It is mainly used for processing raw materials, seamless aluminum tubes, structural profiles and custom profiles, etc. 6082 Aluminum sheet generally has very good processing characteristics and very good anodic reactivity.

6063 Aluminum sheet plate belongs to the Al-Mg-Si series high plasticity alloy, which is an alloy that can be strengthened by heat treatment. 6063 Aluminum plate has excellent processing performance, excellent weldability, good corrosion resistance, good toughness, easy polishing and covering color film, and excellent anodic oxidation effect. The tensile strength and yield strength of 6063 aluminum plate at different temperatures are good, and the elongation is relatively large. It has excellent weldability, gas welding, arc welding, contact spot welding and wire welding are all available, and it has good brazeability. 6063 Aluminum plate is a typical extrusion alloy. 6063 aluminum profiles are widely used in building profiles, pipes, vehicles, furniture, rods, profiles for lifts, etc.

The 5083 aluminum sheet plate belongs to the Al-Mg alloy and has a wide range of applications. Especially in the construction industry, it is inseparable from the alloy and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability and medium strength.

5454 aluminum sheet plate is an aluminum-magnesium alloy, the main alloying element is magnesium, with a content of 2.4~3.0%. 5454 Aluminum plate is a typical anti-rust aluminum plate, which can adapt to harsh corrosive environments and has high strength, excellent corrosion resistance, good weldability and general formability.

The 5 bar aluminum checker plate is made of rolled smooth aluminum plate, rolled with steel rolls engraved with 5 bar or diamond, and pressed on the surface of the aluminum plate to produce an aluminum plate with anti-slip and wear-resistant 5 bar or diamond pattern.

5083 aluminum plate has good anti-rust function and can adapt to the corrosion of marine climate. It is often used in some humid and marine environments. For boat building, there are mainly O, H111, H112, H116 and H321 tempers,especially 5083-H321 aluminum sheet.

5182 aluminum plate is Al-Mg rust-proof aluminum,performance of 5182 aluminum plate is similar to 5A02, but because the magnesium content is slightly higher than 5A02, and a small amount of silicon is added, the weldability is better than 5A02, and the 5182 aluminum plate is gas-welded and argon-arc.

5086 aluminum sheet is an ideal choice. Its main element is Magnesium. 5086 aluminum plate has high corrosion resistance, good weldability and medium strength. The excellent corrosion resistance of 5086 aluminum plate is an important reason why it is widely used in shipbuilding. 5086 aluminum plate is also called "rust-proof aluminum plate."